After-sales Service Provided:Field installation, commissioning and training
Applicable Industries:Woodworking machinery
Voltage:380v or customized
After-sales Service Provided:Overseas third-party support available
Oil pressure of hydraulic system:25Mpa
Stroke of main cylinder:350mm
Loading direction:Vertical (from width side)
Size of board:1830*3660mm
Unit pressure:≤42 kg/cm2
Working oil pressure:≤25.7MPa
Lamination sides:Double sides
Main cylinder diameter:420mm*8pcs
Full-auto Line for hourly capacity 80-90pcs
Short Cycle Press Machine---YX2800-6x12ft
List of machine:
1) Raw MDF pallet 2) Lifter 3) Pusher 4) Cleaner 5) Position conveyor 6) Vacuum transfer system 7) Paper apply conveyor 8) Paper frame 9) Static electrical 10) Belt loading and unloading system 11) Press 12) Unloading belt 13) Conveyor 14) Trimming 15) Position conveyor 16) Vacuum checking system 17) 2A grade conveyor+ 2 A grade finish conveyor 18) Secondary recycle system 19) Chiller
1. Capacity and Running Cycle
Capacity: around 80-90pcs per hour (pressing time ≤18s)
Mechanical Cycle Time around 19sec.
• pressure decrease to 0 bar after elapse of pressing time 1 sec.
• opening of the press at speed 2 sec.
• loading and unloading 8+4 sec.
• closing of the press at speed/slow speed until end of contact 2 sec
• pressure build-up to 120 N/cm². 2 sec.
• slow opening before fast speed: + approx. 0,5 – 1,0 sec.(**)
(**) This time depends on the quality of the utilised papers and base material. changing the mode may save cycle time as well.
Accurate data subject to final machine
2-1 Main Parameters
YX2800 - 6X12
28000 KN ( 2800 TONS )
Size of board
Thickness of board
Vertical (from width side)
Double sides (<8mm board laminate one side one time)
2-2 Main Press Parameter
Main frame thickness
Hot platen top/bottom W/L/T
Temperature of heating plate
Net weight of main press
Main motor power
2-3 Hydraulic System
Main cylinder diameter
Stroke of main cylinder
Hardness and smoothness
HRC 52, Ra < 0.8
Working oil pressure
Hydraulic oil (prepared by the buyer)
46# resistant oil, 5 cans x 170 kg/can
2-4 Heating Consumption
2-5 Air Consumption
Arrangement of compressed air
Gross weight: 3000 kg
Function: Feeding the board to the line from pallet automatically. Worker should put the pallet of board into right position and push star to feed.
Gross weight: 800 kg
Function: Pushing the board from the pallet to conveyor one by one.
Gross weight: 900 kg
Function: By using brush and vacuum to clean the dust of board.
4. Vacuum transfer system
Gross weight: 2900 kg
Function: Vacuum plate pick up the board and put to the top of board.
5. Paper frame
Gross weight: 500 kg
Function: Sock the paper
6.Loading and unloading system
Gross weight: 700 kg
Function: belt loading and vacuum unloading at the same time.
Gross weight: 90000 kg
Function: Laminated the products. With extra support part to enlarge the strength of machine body.
Gross weight: 2800 kg
Function: Trimming the edge of four side automatically.
10. Vacuum unloading system
Gross weight: 2000 kg
Function: It has the vacuum chuck, which would transfer the board to pointed location.
1) Provide the free consultation of the equipment
2) Provide the standard device and the flow chart
3) According to the clients’ special requirement, offering the reasonable plan and free design to help to select the equipment.
4) Welcome to visit our factory
Services during the sales:
1) Inspect the machine before leaving the factory.
2) Oversea install and debug the equipment
3) Train the first-line operator.
After sale services:
1) 24 hours online service
2) Provide the VIDEO with Install and debug the equipment
3) Provide technical exchanging
1. All kinds of mold can be made by customer's requirements
2. All price are based on FOB, QINGDAO, China
3. Payment: by T/T 30% down payment, 70% upon machinery completion.
4. Delivery: After finishing all the payment
5. All the parameters above just for reference, for they are updating all the time
6. Package: Standard packing
7. Warranty: All the machine enjoys one year's warranty, in this period.
Any problems of machine, please feel free to contact us. We will try our best to make it.
SINOEURO machinery making is a manufacturer of wood working machinery with well equipped testing facilities and strong technical force. 1. Leading manufacturer of woodworking machinery in China, found in 1994. specialize in this field for more than 20 years. 2. Almost 20 year export experience, exported dozens of countries in Asia, Europe, Africa and America. All products are quite popular among clients. 3.Specializing in plywood production line. We have our own designers to produce machine according to your requirement. 4. Having own after –sale maintenance center, our engineer can go to overseas for installation and commissioning.
SHANDONG SINOEURO MACHINERY CO., LTD ADD:Yitang town industrial park, Lanshan district,Linyi,Shandong Province,China. Tel/Fax:+86-539-8295107/8231781 Whatapp/viber/wechat:+86-15610675709 Skpye:woodbased.machinery Website:www.sinoeurocn.com